Q Install Qi65CP Qi65SP 6.5" In-Ceiling Single Speaker

✓ Full manufacturer warranty

✓ Authorised UK Dealer

✓ Delivery Available

Q Install Performance 6.5" In-Ceiling speakers

All the in-ceiling models boast a 6.5” (165mm) polypropylene cone. In the superior ‘Performance’ variants this is an injection-moulded, mass damped, Nano Particle based driver cone, for lower distortion and colouration.
£159.00

* Required Fields

Q Install

FREE Delivery to Mainland UK*

*Read more

All Next Working Day orders placed before 4pm are dispatched same day (Excludes bank holidays and weekends).

RETURNS
We're pretty sure you'll be happy with your purchase, however for details about our returns policy click here.

 

Product Description

Details

All the in-ceiling models boast a 6.5” (165mm) polypropylene cone. In the superior ‘Performance’ variants this is an injection-moulded, mass damped, Nano Particle based driver cone, for lower distortion and colouration.

Q Install has used cutting edge industrial and acoustic engineering to create a striking bezel and grille design that clips magnetically into place. Circular and square grille options are available to ensure the perfect match for each customer’s décor. Shallow depth requirement - all models are less than 79 mm deep.

Tweeters are fully open on most models avoiding the use of protective bridges through the integration of Automatic Tweeter dome Recovery technology (ATR) that restores the dome after accidental deformation.

Q Install Performance models feature a larger magnet assembly giving a 30% increase in program power handling capability. In addition precision components are utilized in the crossover filters, together with gold plated connectors.

Features

Specifications

Features

Speaker Specifications

-Tweeter: Swivel
-Tweeter diameter: 1 x 1" (25mm)
-Woofer diameter: 165mm
-Power handling (program): 15-80W
-Impedance (nominal) ohms: 8ohm
-Sensitivity dB spl (2.83V, 1m): 90 (switchable HF)
-Response(Low freq.) -3dB Hz: 70
-Maximum rear depth: 79mm
-Size(Round grilles): 232mm dia
-Warranty: 5 Years

 

 

 

How to guide

 

Step 1

Select a suitable mounting location for the speaker taking note of the Warning Notices above. Using the installation template supplied mark the speaker position and cut the mounting hole.  

 

Step 2

Make sure all equipment is switched off.  The speaker cable should be stripped back ~10mm so that there are bare wire ends. Remove the packaging and protective dust cover from speaker and attach the speaker leads using the pushdown spring clip terminals at the rear of the speaker. The positive conductor should be connected to the red terminal and the negative conductor to the black terminal.

Note: Tweeter output level adjustment (‘P’ & ‘CW’ versions)

It is recommended to leave the switch in the ‘0’ position for the initial sound check.

 

Step 3

Check that each of the 4 swing out clamps are rotated inwards. Push the speaker through the mounting hole and position flush with the ceiling. Whilst holding the speaker in place tighten each of the mounting screws using a No. 2 Pozidriv® screw driver in the order shown in the diagram (left). When an increase in resistance is felt the clamp is in position.

 

Step 4

Once the speakers are installed they should be tested before the grilles are fitted. The 6.5” Performance in-ceiling stereo speaker feature a swivel tweeter that may be adjusted allowing the high frequencies to be directed towards or away from the normal listening position as required. The tweeter’s outer frame (not dome) should be pushed gently to achieve the desired tweeter position. 

 

Step 5

The 6.5” Performance in-ceiling stereo speaker features a magnetic grille, locate the grille over the speaker bezel where it will be pulled into place. Note that square grilles may be positioned at any angle required.

Some models feature a white backing cloth behind the grille to help minimize visual contrast with the ceiling. For the very best sound performance it is recommended that this cloth is removed before use. To remove simply peel away the backing cloth from the grille.

 

You may also be interested in the following product(s)